지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.
목차
등록된 정보가 없습니다.
참고문헌 (1)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
굴곡형 케이블-막 지붕 시스템의 비선형 해석
한국공간구조학회지
2017 .01
-
케이블 스포크 휠 지붕 시스템의 비선형 거동
한국공간구조학회지
2017 .01
-
Structural behavior of inverted V-braced frames reinforced with non-welded buckling restrained braces
Steel and Composite Structures, An International Journal
2015 .01
-
Diagonal bracing of steel frames with multi-cable arrangements
Structural engineering and mechanics : An international journal
2016 .01
-
개폐식 방사형 케이블 지붕 시스템의 역학적 특성
한국공간구조학회지
2017 .01
-
Development of a self-centering tension-only brace for seismic protection of frame structures
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental and numerical study of a proposed steel brace with a localized fuse
Structural Engineering and Mechanics, An Int＇l Journal
2022 .10
-
Seismic performance analysis of steel-brace RC frame using topology optimization
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
대공간 구조를 위한 텐세그리티 모듈 제작
한국공간구조학회지
2019 .01
-
거셋플레이트의 강성을 도입한 중심가새골조의 실용적인 해석 모델
한국강구조학회 학술대회 발표집
2021 .06
-
Local and global buckling condition of all-steel buckling restrained braces
Steel and Composite Structures, An International Journal
2017 .01
-
Fatigue performance of rib-roof weld in steel bridge decks with corner braces
Steel and Composite Structures, An International Journal
2018 .01
-
제주지역 철골 아치구조의 효율적인 라이즈-스팬비에 관한 연구
대한건축학회연합논문집
2024 .04
-
건물 모형 실험을 통한 쿨루프 효과 비교
대한설비공학회 학술발표대회논문집
2019 .11
-
Progressive collapse analysis of buildings with concentric and eccentric braced frames
Structural engineering and mechanics : An international journal
2017 .01
-
Seismic behavior enhancement of frame structure considering parameter sensitivity of self-centering braces
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Effect of pre-stressed cable on pre-stressed mega-braced steel frame
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Mechanics of a variable damping self-centering brace: Seismic performance and failure modes
Steel and Composite Structures, An International Journal
2019 .01
-
금속지붕 벗겨짐 방지를 위한 직접고정 시스템에 대한 연구
대한건축학회논문집
2021 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0