지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 30 - 37 (8page)
이용수
초록· 키워드
오류제보하기
iFLASH System is new structural floor system which consists of sandwich panels filled with nano-composite. The nano-composite has low specific gravity and high bonding strength with steel plates. The bonding strength is one of important factors for structural performance of iFLASH System and it can further be improved by surface preparation such as blast metal cleaning. However, using none blast steel plates is recommended since surface preparation generates additional fabrication time and cost. In this study, a bonding strength test and bending experiment were conducted to check feasibility of applying none blast steel plates to iFLASH System. Moreover, stress in bonding plane between steel plates and nano-composite was analytically evaluated by finite element method. Consequently, flexural capacity of the specimen was 11% higher than theoretically calibrated value and its flexural behavior was structurally efficient without defect of bonding.
목차
등록된 정보가 없습니다.
참고문헌 (23)
참고문헌 신청
2014 / Standard Test Method for Tensile Properties of Plastics / ASTM D638, American Society for Testing and Mater
2010 / Standard Test Method for Compressive Properties of Rigid Plastics / ASTM D649, American Society for Testing and Materials
Banghai J. / 2015 / Failure Mechanism of Sandwich Beams subjected to Three-Point Bending / Composite Structures 133:739~745
Choi, J. W. / 2001 / T type Steel Concrete Composite Beam Analysis / Journal of Architectural Institute of Korea 21(2):305~308
Flores-Johnson E. / 2011 / Experimental Study of the Indentation of Sandwich Panels with Carbon Fibre-Reinforced Polymer Face Sheets and Polymeric Foam Core / Composites Part B:Engineering 42(5):1212~1219
2010 / Standard Test Method for Compressive Properties of Rigid Plastics / ASTM D649, American Society for Testing and Materials
Banghai J. / 2015 / Failure Mechanism of Sandwich Beams subjected to Three-Point Bending / Composite Structures 133:739~745
Choi, J. W. / 2001 / T type Steel Concrete Composite Beam Analysis / Journal of Architectural Institute of Korea 21(2):305~308
Flores-Johnson E. / 2011 / Experimental Study of the Indentation of Sandwich Panels with Carbon Fibre-Reinforced Polymer Face Sheets and Polymeric Foam Core / Composites Part B:Engineering 42(5):1212~1219
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
특수나노소재를 이용한 iFLASH 시스템의 현장 적용
복합신소재구조학회지
2015 .01
-
iFLASH 시스템의 진동특성 연구
한국공간구조학회지
2016 .01
-
iFLASH 시스템의 남북교회 현장 적용
대한건축학회 학술발표대회 논문집
2015 .10
-
Development of NOVEL Structural System for Piloti Type Building
대한건축학회 학술발표대회 논문집
2019 .04
-
스틸-알루미늄의 주조접합 특성에 미치는 표면처리의 영향
한국생산제조학회 학술발표대회 논문집
2017 .12
-
절곡 강판(Cap)을 전단연결재로 사용한 강판-콘크리트 합성보의 휨강도 분석
한국산학기술학회 논문지
2018 .07
-
철골 프레임의 폭발 및 연쇄붕괴해석을 위한 효율적 모델링 기법
대한건축학회 논문집 - 구조계
2015 .09
-
기둥 보강용 PROTECT 방폭 패널의 충격저항성능
대한건축학회 논문집 - 구조계
2017 .02
-
Driving Forces of Silver Nano-porous Sheet Die Bonding at 145 °C and 175 °C in the Air
마이크로전자 및 패키징학회지
2024 .09
-
Numerical Investigation of Blast Pressure on a Steel Plate Using Three-dimensional ALE Method for Different Explosive Geometries
대한토목학회 학술대회
2024 .10
-
The multi-axial strength performance of composite structural B-C-W members subjected to shear forces
Steel and Composite Structures, An International Journal
2018 .01
-
New technique for strengthening reinforced concrete beams with composite bonding steel plates
Steel and Composite Structures, An International Journal
2015 .01
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
탄소 섬유 강화 플라스틱과 금속의 접합에서 표면 패턴에 따른 접합 강도 영향
한국생산제조학회지
2017 .08
-
노천시험발파의 진동평가와 개선방안
한국산학기술학회 논문지
2017 .01
-
Structural coupling mechanism of high strength steel and mild steel under multiaxial cyclic loading
Steel and Composite Structures, An International Journal
2018 .01
-
Fire Resistance Studies on High Strength Steel Structures
International journal of high-rise buildings
2018 .01
-
Steel Plate 벽체 Pile의 구조성능 실험 연구
한국콘크리트학회 학술대회 논문집
2022 .05
-
강판 형상비에 따른 병렬 강판전단벽 시스템 거동특성에 관한 실험연구
대한건축학회 학술발표대회 논문집
2018 .10
-
Structural bonding for civil engineering structures: New model of composite I-steel-concrete beam strengthened with CFRP plate
Steel and Composite Structures, An International Journal
2021 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0