지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Partial or complete prosthesis is needed when teeth are lost due to various kinds of reason. Artificial teeth recover occlusion instead of natural teeth. Artificial teeth are required of esthetics, fragile resistance and abrasive resistance. Artificial tooth is made of acrylic resin or porcelain. Nowadays, acrylic resin artificial teeth are mainly used. Acrylic resin teeth are occluded with natural teeth, gold alloy, Ni-Cr alloy or porcelain etc. Acrylic resin teeth have similar translucency, gloss of natural teeth. And it has good chemical bond with denture base material, but it has low wear resistance. The aim of this study is to compare wear resistance among several denture teeth(Endura, SR-orthosit-PE, Planustar) and between artificial resin denture teeth and opposing 3 restorative materials(gold, Ni-Cr alloy, porcelain). Wear tests were conducted with a rotating wear testing apparatus(pin-on-disk type wear tester) under conditions of rpm 180, 75 minutes and constant loading of 50N. The upper part was the cusp of maxillary first molar and the lower part was a disk type restorative materials. To make similar oral environment, water was supplied continually. The acrylic resin teeth wear was determined by weighing the cusp each 5 minutes during 75 minutes test. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows: 1. Wear rates of acrylic resin teeth opposing to the restorative materials were high in order of Porcelain, Gold, Ni-Cr alloy (p<.05). 2. Wear resistance rate opposing to the Porcelain disk, was shown in order of Endura, SR-orthosit-PE, Planustar. The wear rate of opposing to porcelain disk was above two times more than that of other groups (p<.05). 3. Wear resistance rates opposing to the Gold, Ni-Cr alloy disk, was shown in order of Endura, SR-orthosit-PE, Planustar (p<.05). 4. A degree of the surface hardness is directly proportional to the degree of wear resistance. There are statistically significant differences between each groups (p<.05).
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
수종 의치용 인공치의 마모도에 관한 연구
구강회복응용과학지
1998 .06
-
In vitro Wear Resistance of Artificial Denture Teeth
대한치과재료학회 학술대회
2011 .05
-
총의치교합면의 사용재료에 따른 마모도 측정에 관한 실험적 연구
대한치과기공학회지
1983 .01
-
Shear Bond Strength of Each Layer of Artificial Teeth to Denture Base Resin
대한치과재료학회 학술대회
2011 .05
-
Immediate fixed partial denture after tooth extraction in patients with systemic diseases: A clinical report
The Journal of Advanced of Prosthodontics
2016 .01
-
Tensile bond strength of four denture resins to porcelain teeth with different surface treatment
The Journal of Advanced of Prosthodontics
2013 .01
-
합성수지 인공치와 열중합의치상 Resin의 결합시 인공치에 형성하는 유지공의 효과에 관한 연구
대한치과기공학회지
1987 .01
-
Bond strengths of artificial teeth and 3D printing denture base resin
대한치과재료학회 학술대회
2017 .11
-
총의치를 위한 인공치배열과 교합
대한치과의사협회지
2015 .06
-
Effect of different denture cleansers on surface roughness and microhardness of artificial denture teeth
The Journal of Advanced of Prosthodontics
2016 .01
-
다양한 색소에 대한 3D 프린팅 인공치의 색 안정성
대한치과보철학회지
2020 .01
-
Treatment Denture에 관한 연구
대한치과의사협회지
1975 .10
-
열중합(熱重合) 의치상(義齒床) Resin과 합성수지인공치(合成樹脂人工齒)의 결합강도(結合强度)에 관(關)한 연구(硏究)
대한치과기공학회지
1986 .01
-
의치사의 교육과정에 관한 연구
대한치과기공학회지
2010 .01
-
경북지역 장수노인의 저작능력과 건강상태
영남의대학술지
1999 .01
-
[Complete Denture] 즉시의치
대한치과의사협회지
1985 .01
-
비용부담형태에 따른 의치 만족도 비교
대한치과기공학회지
2014 .01
-
의치사용자의 구강건강, 의치관리 및 의치건강보험 인식에 대한 실태 조사
대한치과보철학회지
2018 .01
-
국내 시판 의치부착재의 ISO 표준규격에 의한 평가
대한치과재료학회지
2014 .09
-
다양한 레진 의치상의 적합도와 기계적 특성
대한치과의사협회지
2019 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0