지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Recently new technological development needs the advances in the fields of new materials. The most advanced design is not useful if new material's performance is not realized adequately for bearing the service loads and conditions. FGMs suggests the reasonable solution for the those requirements because of its wide range microstructure and the continuous constitutions. It's especially good for the heat-resisting components, piezoelectricity and aerocraft fields. However the fabrication and its experimental estimation methods have not been established because of its various freedom of material's properties. Therefore it is necessary to develope the fabrication method and estimation of strength and deformation. The experiments are conducted under a four point flexural test. According to results, this study shows that FGMs is well fabricated and the deformation and strain fields are expressed very well by digital image correlation method.
목차
등록된 정보가 없습니다.
참고문헌 (12)
참고문헌 신청
M. Arai / 2007 / Mode I and Mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nano fiber / JSME Annual Meeting :667~668
H. P. Xiong / 2005 / Experimental study on heat insulation performance of functionally graded metal/ceramic coatings and their fracture beghavior at high surface temperature / Surface & coatings technology 194:203~214
M. Sasaki / 1991 / Fabrication and properties of functionally gradient materi / Journal of the ceramic society of Japan 99:1002~1013
S. R .Mcneil / 1987 / The estimation of stress intensity factor by digital image correlation / Engineering fracture mechanics 28:101~112
R. K. Muller / 1979 / Complete automatic analysis of photoelastic fringes / Experimental mechanics 19:245~251
H. P. Xiong / 2005 / Experimental study on heat insulation performance of functionally graded metal/ceramic coatings and their fracture beghavior at high surface temperature / Surface & coatings technology 194:203~214
M. Sasaki / 1991 / Fabrication and properties of functionally gradient materi / Journal of the ceramic society of Japan 99:1002~1013
S. R .Mcneil / 1987 / The estimation of stress intensity factor by digital image correlation / Engineering fracture mechanics 28:101~112
R. K. Muller / 1979 / Complete automatic analysis of photoelastic fringes / Experimental mechanics 19:245~251
이 논문의 저자 정보
최근 본 자료
댓글(0)
0