지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Slab formwork consists of sheathing, stringer, hanger and shore. In construction site, pipe supports are usually used as shores which are consisted of the slab formwork. In this study, compressive strength of 80 pipe supports was measured by knife edge test and plate test. Buckling load of pipe supports was analyzed by structural analysis program(MlDAS). Theoretical buckling load with/without initial deformation was got by theoretical analysis. According to these results, buckling load which was analyzed by structural analysis program(MlDAS) was larger than compressive strength of knife edge test and plate test. Theoretical buckling load without initial deformation was larger than compressive strength of knife edge test and plate test. But Theoretical buckling load with initial deformation was lower than compressive strength of knife edge test and plate test. Initial deformation equation for test method according to the pipe support length was suggested. Therefore, the present study results will be used to design the slab formwork safely.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
재사용 파이프서포트의 내력변화 연구
건설안전기술
2006 .01
-
재사용 파이프서포트의 내력변화 연구(III)
한국안전학회지
2006 .01
-
재사용 파이프서포트의 내력변화 연구 (1)
한국안전학회지
2004 .01
-
파이프서포트(V6)의 좌굴특성에 관한 연구
한국안전학회지
2011 .01
-
Buckling of Orthotropic Plates under Various Inplane Loads
KSCE JOURNAL OF CIVIL ENGINEERING
2006 .09
-
재사용 파이프서포트의 내력변화 연구(II)
한국안전학회지
2005 .01
-
Buckling and vibration analysis of stiffened plate subjected to in-plane concentrated load
Structural engineering and mechanics : An international journal
2003 .01
-
Top-Down 공법용 무지주 거푸집 Easy Down 공법 개발
대한건축학회 논문집 - 구조계
2009 .04
-
파이프 서포트의 내력 산정 방안
한국안전학회지
2001 .01
-
Effect of lateral restraint on the buckling behaviour of plates under non-uniform edge compression
Structural engineering and mechanics : An international journal
1997 .01
-
Experimental determination of the buckling load of a flat plate by the use of dynamic parameters
Structural engineering and mechanics : An international journal
2000 .01
-
On the post-buckling behaviour of plates under stress gradient
Structural engineering and mechanics : An international journal
1996 .01
-
Experimental determination of the buckling load of rectangular plates using vibration correlation technique
Structural engineering and mechanics : An international journal
2011 .01
-
파이프 서포트의 좌굴특성에 대한 지지조건의 영향
한국안전학회지
2015 .01
-
Use of Buckling Coefficient in Predicting Buckling Load of Plates with and without Holes
복합신소재구조학회논문집
2014 .01
-
Research Advances on Tension Buckling Behaviour of Aerospace Structures : A Review
International Journal of Aeronautical and Space Sciences
2011 .03
-
Comparison of alternative algorithms for buckling analysis of slender steel structures
Structural engineering and mechanics : An international journal
2012 .01
-
The buckling of piezoelectric plates on pasternak elastic foundation using higher-order shear deformation plate theories
Smart structures and systems
2018 .01
-
Numerical study of dynamic buckling for plate and shell structures
Structural engineering and mechanics : An international journal
2005 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0