선행연구에서 다양한 목질 보드류를 열분해하여 다공질 탄화보드 제조에 성공하였고, 높은 난연성, 전자파차폐성, 원적외선방사, 폼알데하이드 흡착성, 흡음성능을 확인하였다. 본 연구에서는 경제성과 흡음성이 뛰어난 탄화 중밀도 섬유판(MDF)을 선택하여 보다 높은 흡음성능을 부여하기 위해 다른 흡음재료에도 사용 중인 샌딩처리와 타공기법을 시도하였다. 또한 개선된 흡음성능을 바탕으로 실제 음향판을 제작하여 그 음향적 효과를 파악하였다. 탄화 MDF를 십자모양(타공 5개), 직사각형모양(타공 9개), 일자모양(타공 5개)으로 타공 처리한 후, 흡음률을 측정한 결과, 무처리 탄화 MDF의 흡음률은 14% 정도를 나타내었고, 직사각형모양 타공 시편이 16.01%로 흡음률이 가장 높았고 십자모양 타공 시편이 15.68%, 일자 타공 시편은 14.25%의 흡음률을 나타내어 그 효과가 미미하였다. 반면에, 탄화 MDF의 표면을 각 1, 2, 3 mm로 표면샌딩 처리후 흡음률을 측정한 결과, 무처리 시편(13%)에 비해 65% 증가한 21.7% (1 mm 샌딩), 21.83% (2 mm 샌딩), 19.37% (3 mm 샌딩)를 확인하였다. 이 결과를 바탕으로 실대형 탄화보드 복합 음향판을 제작하였으며 잔향실법으로 흡음시험한 결과 감음계수 0.45로 높은 흡음성능을 발휘하여 상업화도 가능할 것으로 판단된다.
In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.