지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.1
- 수록면
- 269 - 275 (7page)
이용수
초록· 키워드
오류제보하기
Al-Mg-Si/Al hybrid alloy was prepared by Duo-casting and the mechanical behavior was evaluated based on their microstructure and mechanical properties. The hybrid aluminum alloy included the Al-Mg-Si alloy with fine eutectic structure, pure Al with the columnar and equiaxed crystals, and the macro-interface existing between Al-Mg-Si alloy and pure Al. The growth of columnar grains in pure Al occurred from the macro-interface. The tensile strength, 0.2% proof stress and bending strength of the hybrid aluminum alloy were almost similar to those of pure Al, and the elongation was much higher than the Al-Mg-Si alloy. The fracture of the hybrid alloy took place in pure Al side, indicating that the macro-interface was well bonded and the mechanical behavior strongly depends on the limited deformation in pure Al side.
목차
등록된 정보가 없습니다.
참고문헌 (10)
참고문헌 신청
이성희 / 2011 / 반복겹침접합 압연공정에 의해 제조한 초미세립 AA1050/AA5052 복합알루미늄합금판재의 어닐링 특성 / 한국재료학회지 21(12):655~659
O. Yilmaz / 2003 / Electrical and thermal properties of the interface at diffusion-bonded and soldered 304 stainless steel and copper bimetal / J. Mater. Process Technol 141:67~76
Kacar R / 2004 / An investigation on the explosive classing of 316L stainless steeldin- P355GH steel / J. Mater. Process Technol 152:91~96
Kazanowski P / 2004 / Bi-metal rod extrusion-process and product optimization / Mater. Sci. Eng., A 369:170~180
Chesney P / 2003 / A new spray coating process for manufacture of stainless steel clad construction steel with resistance to corrosion by de-icing salts & seawater / Proc. of SDMA 2003 and ICSF V :3~9
O. Yilmaz / 2003 / Electrical and thermal properties of the interface at diffusion-bonded and soldered 304 stainless steel and copper bimetal / J. Mater. Process Technol 141:67~76
Kacar R / 2004 / An investigation on the explosive classing of 316L stainless steeldin- P355GH steel / J. Mater. Process Technol 152:91~96
Kazanowski P / 2004 / Bi-metal rod extrusion-process and product optimization / Mater. Sci. Eng., A 369:170~180
Chesney P / 2003 / A new spray coating process for manufacture of stainless steel clad construction steel with resistance to corrosion by de-icing salts & seawater / Proc. of SDMA 2003 and ICSF V :3~9
이 논문의 저자 정보
최근 본 자료
댓글(0)
0