지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2008.1
- 수록면
- 129 - 135 (7page)
이용수
초록· 키워드
오류제보하기
The reheating stage of electromagnetically stirred Al billet is a critical factor in the thixoforming process. When reheated to the solid-liquid state, the microstructure evolves to a more globular and more homogeneous structure by a coarsening mechanism, the kinetics depending on the initial microstructure. Microstructural evolution has been characterized by conventional parameters (mean size of particle and shape factor) as a function of holding time in the solid-liquid state. The aim of this study is to report experimental results concerning microstructural evolution in the solid-liquid state of electromagnetically stirred Al billet. The material was elaborated in the form of continuously cast bars solidified with electromagnetic stirring to degenerate the dendritic structure. The choice of the reheating conditions is determined by a dendritic ripening and coalescence mechanism, involving variations of both the shape and size of the particles. The reheating time has to be long enough to allow a minimum degree of spheroidizing, but has to be limited as much as possible in order to avoid excessive ripening. The optimum microstructure was obtained at the reheating temperature of near $584^{\circ}C$ and the holding time of 5 min. The only means of combining high productivity with good casting quality was to use feedstock billets whose microstructure showed rapid transformation characteristics.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microstructural transition of electromagnetically continuous cast billet of Al alloy during reheating at semi-liquid region
고액공존성형 심포지엄
2003 .12
-
An Estimation of a Billet Temperature during Reheating Furnace Operation
International Journal of Control, Automation, and Systems
2007 .02
-
연속식 가열로용 Level 2 제어시스템 구현
에너지기후변화학회지
2017 .06
-
Ca첨가 반응고 AZ31 마그네슘 합금의 재가열에 따른 미세조직 변화
한국주조공학회지 (주조)
2012 .01
-
A Billet Heat Transfer Modeling during Reheating Furnace Operation
제어로봇시스템학회 국제학술대회 논문집
2004 .08
-
Effect of Isothermal Reheating at Different Holding Times on The Microstructure of Al-Mg₂Si In-situ Cast Composite
기타자료
2010 .06
-
Microstructural Evolution of Semi-Solid AZ61 Magnesium Alloy during Reheating Process
기타자료
2006 .09
-
전자교반된 반응고 A356합금의 재가열조건에 따른 미세조직의 변화
한국재료학회 학술발표대회
1998 .01
-
Flatness Based Inductive Reheating of A356 Billets into the Semi-Solid State
기타자료
2006 .09
-
Effect of slope plate variables and reheating on the semi-solid structure of Al alloys
기타자료
2006 .09
-
Supervisory control of reheating furnace : Modeling and Optimal Control of The Reheating Furnace System
제어로봇시스템학회 국내학술대회 논문집
1995 .10
-
경량합금 반용융 압출 기술 개발 - Part 1. 반융용 압출을 위한 조직제어
한국주조공학회지 (주조)
2006 .01
-
다층용접한 슈퍼 듀플렉스 스테인리스강 용접금속의 조직 및 충격인성
한국해양공학회지
2012 .12
-
Kinetics of coarsening and solid sphericity during reheating of ductile iron and Al alloys
기타자료
2006 .09
-
Inductive Reheating of Steel Billets into the Semi-Solid State Based on Pyrometer Measurements
기타자료
2006 .09
-
A356 합금의 연속주조시 전자기 교반에 따른 미세조직 변화
한국주조공학회지 (주조)
2005 .01
-
Effect of Sulfur Contents and Welding Thermal Cycles on Reheat Cracking Susceptibility in Multi-pass Weld Metal of Fe-36%Ni Alloy
대한용접학회 특별강연 및 학술발표대회 개요집
2005 .06
-
Robust Control of Reheat-Fan Engine
제어로봇시스템학회 국내학술대회 논문집
1993 .10
-
Thixoforming of AI7075 Alloy with High Solid Fraction
한국소성가공학회 학술대회 논문집
2011 .10
-
냉각/재가열 시스템의 성능해석에 관한 연구
대한기계학회 춘추학술대회
2008 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0