부식된 PS강연선의 유효단면적 산정을 위해 PS강연선이 부식된 PSC보부재의 휨강도 실험을 수행하였다. 부식된 PS강선들은 PSC보부재가 극한하중에 도달하기 전에 PS강선들이 쉽게 파단될 수 있기 때문에, PSC보부재의 휨강도는 부식된 PS강연선의 잔류단면적을 이용해 계산한 휨강도보다 작게 평가될 수 있다. 따라서, 더욱 안전한 휨강도 평가를 위해서는 부식된 PS강연선의 잔류단면적보다는 부식된 PS강선들의 조기 파단을 고려한 유효단면적을 적용할 필요성이 있다. 이 연구에서는 PS강연선의 부식 단면적의 감소가 PSC보부재 휨강도에 미치는 영향을 분석하기 위하여, PS강연선의 부식 단면적이 다른 PSC보부재를 제작한 후 파괴시까지 정적하중을 재하하여 실험체의 휨강도를 평가하였다. 실험결과를 토대로 부식된 PS강연선의 유효단면적 산정 방법을 제안하였다.
Ultimate flexural tests are conducted to evaluate the effective area of corroded prestressed strands in prestressed concrete beams with corroded strands. Corroded prestressed steel wires in prestressed concrete beams can be disconnected before ultimate load, and thus, ultimate flexural strength can be less than the calculated flexural strength using the residual area of corroded strand. Therefore, considering premature wire fractures of corroded strand, effective area rather than residual area is required for obtaining the conservative flexural strength of PSC beams with corroded strands. In order to investigate the effects of the loss of strand area on the flexural strength of prestressed concrete beams, nine test beams were fabricated with varied loss of strand area and static load applied to obtain the ultimate flexural strength of the test beams. Based on the test results, a method for evaluating the effective area of corroded strand is proposed.