메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김완진 (전북대학교 유기소재파이버공학과) 이현영 ([주]휴비스) 백병운 (전북대학교 유기소재파이버공학과) 정용식 (전북대학교 유기소재파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제52권 제1호
발행연도
2015.1
수록면
26 - 34 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Fibrid is a material with complex, fibrous, film-like, and intermediate forms. The diameters of the particles vary from $20-50{\mu}m$ and $100-10,000{\mu}m$. The optimal form and size of the particles depend on the area of application. The form of fibrid is the result of two processes, a wave process and diffusion. The life span and break-up pattern of the polymer depend on the interphase surface tension, viscosity of the polymer, and speed ratio of the polymer to the medium. In this study, fibrids were produced using a fibridator with high-speed shearing force. Several kinds of fibrids were obtained by changing the processing conditions, including solvent content (20, 30, and 40 wt%) in the coagulating solution, viscosity of the m-aramid dope solution (8, 10, and 12 wt%), and rotor speed of the fibridator (2000, 4000, and 6000 rpm). With low solvent content, m-aramid dope was rapidly transformed into the floc form because the coagulation rate was fast. However, as the solvent in the coagulation bath increased, the coagulation rate slowed, and the fibrids stuck together. Lower m-aramid dope viscosity and faster rotor speed were effective in obtaining proper fibrid morphology because of weakened interaction between the polymer chains.

목차

등록된 정보가 없습니다.

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0