메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
안홍주 (인하대학교 고분자공학과) 최준호 (인하대학교 고분자공학과) 조세연 (인하대학교 고분자공학과) 곽효원 (인하대학교 고분자공학과) 진형준 (인하대학교 고분자공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제54권 제6호
발행연도
2017.1
수록면
421 - 428 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Barrier properties of packaging materials can be enhanced by controlling their microstructure and/or blending them with nanofillers such as cellulose nanocrystals (CNCs). CNCs have attracted considerable attention for use in reinforcing composite materials because of their exceptionally high specific strength and modulus, low density, chemical tunability, renewable nature, and relatively low cost. In this study, barrier films were prepared by incorporating CNCs into a poly(vinyl alcohol-co-ethylene) (EVOH) matrix. The CNCs prepared by acid hydrolysis of microcrystalline cellulose were ~348 nm long and 20 nm in diameter, with aspect ratios of 16. The nanocomposites were prepared by incorporating 1, 2, and 3 wt.% CNCs into an EVOH matrix using solution casting. Turbiscan analysis and contact angle measurements show that the EVOH/CNC composite films possessed interfacial interactions and good dispersion properties. As a result, these composite films may not show any decrease in their transparency. In particular, the oxygen transmission rate in the composite films significantly decreased from $3.2cm^3/(m^2{\cdot}day)$ to $1.3cm^3/(m^2{\cdot}day)$ when the CNC was added, indicating that the EVOH/CNC nanocomposite films can be used as barrier packaging materials.

목차

등록된 정보가 없습니다.

참고문헌 (37)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0