메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
백병운 (전북대학교 공과대학 유기소재파이버공학과) 김완진 (전북대학교 공과대학 유기소재파이버공학과) 정용식 (전북대학교 공과대학 유기소재파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제51권 제3호
발행연도
2014.1
수록면
114 - 121 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Fibrids are materials of a complex fibrous, film-like, or intermediate form. The diameter of the particles varies between $20-50{\mu}m$, and $100-10,000{\mu}m$. The optimal form and size of the particles depends in each case on the area of application. The fibrid form is the result of two processes, viz. a wave process and diffusion. The life span and break-up pattern of the polymer depend on the interphase surface tension, the viscosity of the polymer, and the diffusion speed ratio of the polymer and medium. In this study, m-aramid was polymerized at low temperature and in solution with an equal molar ratio of MPD and IPC in DMAc. The meta-aramid solution was prepared by dissolution in DMAc, and ethanol was used as a coagulation bath. The rotation speed was the main factor affecting the formation and morphology of the fibrid. Meta-aramid paper was produced from m-aramid fiber with meta-aramid fibrid by wet laying. The results showed that fibrid particle sizes decreased with increasing rotation speeds and decreasing concentrations of m-aramid in the solution. The properties of the m-aramid fibrid as a function of the processing conditions were investigated using an image analyzer, optical microscopy, and SEM. The resulting meta-aramid paper was analyzed in terms of its morphology, thickness, air permeability, and mechanical properties.

목차

등록된 정보가 없습니다.

참고문헌 (12)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0