메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박우리 (단국대학교 섬유공학과) 윤기종 (단국대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제45권 제3호
발행연도
2008.1
수록면
179 - 185 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Segmented block poly(ether-ester) containing poly(propylene glycol), PPG, soft segments and Poly(butylene 2,6-naphthalenedicarboxylate), PBN, hard segments were prepared by transesterification and polycondensation. Synthesis of the PBN/PPG copolymer were confirmed by $^1H$-NMR. Thermal behavior was measured by DSC and TGA. Permeability measurements of PBN/PPG copolymer films were made using an upright cup method. Although $T_m\;and\;T_c$ of PBN/PPG copolymer decreased slightly with increase in PPG composition in the PBN/PPG copolymer, their melting points are in excess of $200^{\circ}C$ which is required for firefighter's protective clothing. The moisture vapor transmission rate(MVTR) increased with addition in the amount of PPG and rising of temperature significantly. But the reduction in density due to the introduction of PPG instead of poly(ethylene glycol), PEG, as the soft segment did not influence MVTR, and the MVTR values were lower compared with commercial breathable films.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0