메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
강은옥 (충남대학교 나노기술학과) 박초희 (충남대학교 유기소재.섬유시스템 공학과) 남영식 (충남대학교 바이오응용화학연구소) 김진홍 (휴비스 R&D센터) 박원호 (충남대학교 유기소재.섬유시스템 공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제47권 제6호
발행연도
2010.1
수록면
399 - 405 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
A nanofibrous web was fabricated by electrospinning poly(trimethylene terephthalate)(PTT). The PTT web with an average diameter of 290 nm was obtained by electrospinning from a 16%(w/v) PTT solution, whereas a PTT film was obtained from solution casting. The water contact angle of the PTT web was much higher than that of the PTT film because the web had a nanofibrous structure with a high surface area and surface roughness. The PTT film crystallized isothermally in the temperature range of $182-231^{\circ}C$ and exhibited a multiple melting phenomenon. The degrees of crystallinity of the PTT film and PTT web were 59.2 and $38.7^{\circ}C$ respectively. The crystallinity of the PTT web was lower than that of the PTT film because the web solidified rapidly by fast solvent evaporation during electrospinning. To increase the thickness of the web, the spinning solvent was changed to 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). As a result, a nanofibrous web with average diameter of 900 nm and thickness of 0.36 mm was obtained under the same electrospinning conditions. The overall porosity of the nanofibrous web was higher than the microfibrous web. The tensile strength and tear strength of the microfibrous web was higher than those of the nanofibrous web, whereas the breaking elongation of the nanofibrous web is higher than that of the microfibrous web.

목차

등록된 정보가 없습니다.

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0