메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
권지광 (부산대학교 유기소재시스템공학과) 황성호 (부산대학교 유기소재시스템공학과) 주시환 ([주]효성 기술원 생산기술연구소) 박진경 ([주]효성 기술원 생산기술연구소) 조현혹 (부산대학교 유기소재시스템공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제46권 제6호
발행연도
2009.1
수록면
355 - 361 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The effect of drawing ratio and drawing temperature on the structure and physical properties of PET tire cord filaments were investigated using wide-angle X-ray diffraction, density, quantity of meso-phase, tensile test and birefringence. PET tire cord filaments were drawn at 80, 90, and $100^{\circ}C$. WAXD equatorial profile results had shown that the reflection observed at $2\theta=17.4^{\circ}$ and $25.9^{\circ}$ are assigned to the (010) and (100) reflections, and the reflection peak was sharper at higher drawing temperature and ratio. The density increased as drawing temperature and drawing ratio increased. The amount of three phases in the filament; crystalline phase, oriented meso-phase and amorphous, was estimated through the X-ray intensity separation procedure. The amount of meso-phase estimated from X-ray peak using a Lorenzian peak width analysis program. It had been shown that the degree of meso-phase increased as drawing temperature decreased at above glass transition temperature. And the degree of meso-phase increased as drawing ratio increased. It tended to samples were drawn to ratio 7, most degree of meso-phase sample had higher tensile strength than others. The tensile strength and birefringence increased as the degree of meso-phase increased.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0