메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박상욱 (숭실대학교 유기신소재.파이버공학과) 이경우 (숭실대학교 유기신소재.파이버공학과) 김영호 (숭실대학교 유기신소재.파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제45권 제2호
발행연도
2008.1
수록면
127 - 136 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Poly(pentamethylene 2,6-naphthalate) (PPN) with a intrinsic viscosity of 0.69 dl/g was synthesized from dimethyl 2,6-naphthalene dicarboxylate and 1,5-pentnandiol via a two-step process of transesterification and polycondensation using a high pressure reactor. Manganese acetate tetrahydrate and tetraisopropyl orthotitanate were used as catalysts for transesterification and polycondensation, respectively. Melt-quenched films of the PPN were prepared and annealed under various conditions, and the thermal properties of the annealed films were characterized by using a DSC and synchrotron WAXS. PPN exhibited a very slow crystallization rate. On DSC thermograms, three melting peaks were observed at around $100{\sim}125^{\circ}C$, depending on the annealing conditions. At least more than 6 hours of annealing was needed for the PPN film to be crystallized when it was annealed at a temperature below its melting point, and 3 hours of annealing when annealed at $100^{\circ}C$ which corresponds to the $T_{ml}$. From the results of DSC and WAXS analysis, it is deduced that the continuous increase in crystallinity of PPN with increasing annealing time comes from the increase in the number of crystallites, not from the increase in the crystallite size.

목차

등록된 정보가 없습니다.

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0