지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2001.1
- 수록면
- 27 - 35 (9page)
이용수
초록· 키워드
오류제보하기
Four different sources of wood-fibers from Eucalyptus, Italian poplar, hemlock, and mixed species fibers were used to study the influence of their fiber characteristics on the performance of medium density fiberboard (MDF) panels bonded with both urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives. Included fiber characteristics were fiber length, size distribution, bulk density, and acidity. Physical and mechanical properties of MDF panels manufactured by dry process using these different fibers were determined for the comparison of board performance. Two hardwood species had a large fraction of short fibers resulting in a higher bulk density while very long hemlock fibers had lower bulk density. Fiber acidity was revealed to strongly affect the internal bond (IB) strength of MDF panels bonded with UF resins. MDF panels made from mixed species fibers showed highest IB strength of all panels prepared. UF-bonded MDF panels showed poor dimensional stability. In conclusion, the present study showed that wood-fiber characteristics such as fiber length, bulk density, and acidity affect the performance of MDF boards, and also suggested that fiber characteristics be considered for MDF panel manufacture.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Change in Chemical Compositions of Leachate and Medium Density Fiberboard from a Laboratory-scale Simulated Landfill
목재공학(Journal of the Korean Wood Science and Technology)
2016 .01
-
Effect of Panel Density and Resin Content on Properties of Medium Density Fiberboard
목재공학(Journal of the Korean Wood Science and Technology)
2017 .01
-
Phenol-Formaldehyde (PF) Resin Bonded Medium Density Fiberboard
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
제지슬러지와 신문고지를 이용한 MDF의 제조 및 물성
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
주사전자현미경 및 X선회절법에 의한 탄화 MDF의 특성
목재공학(Journal of the Korean Wood Science and Technology)
2009 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Physical and Mechanical Properties of Wood Fiber-Polypropylene Fiber Composite Panel
목재공학(Journal of the Korean Wood Science and Technology)
2001 .01
-
Formaldehyde Release from Medium Density Fiberboard in Simulated Landfills for Recycling
목재공학(Journal of the Korean Wood Science and Technology)
2014 .01
-
Environmental Assessments of Leachate from Medium Density Fiberboard in a Simulated Landfill
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
유채박 가수분해물을 이용한 중밀도섬유판(MDF) 제조용 접착제의 개발
목재공학(Journal of the Korean Wood Science and Technology)
2012 .01
-
The Effect of Final Moisture Content of Mat on the Physical and Mechanical Properties of UF-bonded MDF
목재공학(Journal of the Korean Wood Science and Technology)
1995 .01
-
챔버실험을 통한 MDF에서의 포름알데히드 방출의 영향인자 평가
한국주거학회 학술대회논문집
2009 .04
-
The Dyeing Properties of Woody Fiber Regenerated from Waste MDF by Reactive Dyes
목재공학(Journal of the Korean Wood Science and Technology)
2019 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
멜라민시트 적층 MDF 마루판재의 가열에 의한 치수변화
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
목질(木質)과 비목질계(非木質系) 섬유(纖維)를 활용한 복합재(複合材) 연구(硏究) - 폴리프로필렌의 섬유장(纖維長)과 공정변수(工程變數)의 영향(影響)을 중심(中心)으로 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0