지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
In this study, the relationship between wax matrix in lipstick and sweating was investigated by observing the change of size and shape of wax matrix with sweating by Scanning Electron Microscopy (SEM). For observation by SEM, a lipstick sample was frozen in liquid nitrogen, then the oil in the lipstick was extracted out in cold isopropanol($-70^{\circ}C$) for 1-3days. After isopropanol was evaporated, the sample was sputtered with gold, and examined by SEM. When examined the sweated sample by SEM, the change of wax matrix underneath the surface from fine, uniform structure to coarse, nonuniform structure was observed, which was resulted from the caking of surrounding wax matrix. That is, the oil underneath the surface was migrated to the surface of lipstick with sweating, consequently the wax matrix at that region was rearranged into the coarse matrix. In case of flamed lipstick, sweating was delayed and the wax matrix was much coarser than that of unflamed one. Its larger wax matrix at surface region was good for including oil. The effect of molding temperature on sweating was also studied. As the molding temperature was increased, sweating was greatly reduced and the size of wax matrix was increased. It was also found that sweating was influenced with the compatinility of wax and oil. A formula consisting of wax and oil which have good compatibility has a tendency of reduced sweating and increased size of wax matrix. When pigment was added to wax and oil. It was also found that sweating was influenced with the passage of time by observing a thick membrane of wax on surface of lipstick after a month from molding. In case of some lipsticks, the size of wax matrix was altered to bigger or smaller. In conclusion, the structure of wax matrix at the surface region of lipstick was changed with the process of foaming, molding temperature, compatibility of wax and oil, addition of pigment, and the passage of time. In most cases, as the size of wax matrix was increased, sweating was reduced and delayed.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Gnathological Occlusin(악교합,顎咬合)에 의한 Waxing Technique
대한치과기공학회지
1983 .01
-
CONTROL OF HARDNESS OF OIL-WAX GELS BY A NOVEL BRANCHED WAX AND APPLICATION TO LIPSTICKS
대한화장품학회 학술대회
2003 .01
-
Inlay wax의 열팽창에 관한 연구
대한치과기공학회지
2008 .01
-
한국산 Bees Wax
대한화장품학회지
1970 .01
-
직쇄 파라핀 왁스와 분지 왁스 사용에 따른 오일-왁스 겔에 미치는 왁스구조와 광택에 미치는 영향 연구
대한화장품학회지
2010 .01
-
수작업과 CAD-CAM에 의해 제작된 3-unit 브리지 왁스 패턴의 적합도 비교
대한치과재료학회지
2010 .12
-
납형의 성질(性質) 및 성분(成分)에 관(關)한 연구(硏究)
대한치과기공학회지
1980 .01
-
금속주조 수복물의 적합성 향상에 관한 연구 (Wax patten 형성에서 매몰까지)
대한치과기공학회지
1988 .01
-
The study of solid-solid sepafation phenomena of chystal wax compoments on the oil,wax and pigment system
대한화장품학회지
1997 .01
-
하악구치 교합면의 design 조각법에 관한 연구
대한치과기공학회지
2002 .01
-
온도변화에 따른 인레이 왁스의 유동성 변화
대한치과기공학회지
2006 .01
-
Features of the Correct Wax Pattern for Gold Inlay
대한치과의사협회지
1984 .04
-
Wax-up으로 조각한 치관과 CAD로 설계한 치관의 형태 비교
대한치과기공학회지
2017 .01
-
Ring 내 납형의 위치에 따른 귀금속합금 주조체의 수축공 관찰
대한치과기공학회지
2008 .01
-
Cusp Fossa Add On Functional Waxing Technique(I)
대한치과의사협회지
1974 .07
-
악성 두피 종양(Scalp) 환자의 M3 Wax Bolus를 이용한 방사선치료
대한방사선치료학회지
2019 .01
-
의치의 중합방법에 따른 변화에 대한 연구
대한치과기공학회지
1987 .01
-
Cusp Fossa Add On Functional Waxing Technique(II)
대한치과의사협회지
1974 .08
-
Electroforming 법과 Lost Wax Casting 법으로 제작한 순금의 물성 평가
대한치과재료학회지
2005 .03
-
치과기보 제79호
치과기보
1985 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0