메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
위성훈 (서울대 재료공학부) 신거명 (서울대 재료공학부) 송규정 (한국전기연구원 초전도재료연구그룹) 홍계원 (한국산업기술대학교 에너지대학원) 문승현 (서울대학교 재료공학부) 박찬 (한국전기연구원 초전도재료연구그룹) 유상임 (서울대학교 재료공학과)
저널정보
한국초전도저온학회 한국초전도·저온공학회논문지 한국초전도·저온공학회논문지 제6권 제1호
발행연도
2004.1
수록면
12 - 17 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
High critical current density. $J_c over 1 MA/cm^2$at 77 K in a self field was successfully achieved from the YBCO film prepared on (100) SrTiO$_3$ single-crystal substrates by the TFA-MOD process. Unlike a normal TFA-MOD process, we prepared the TFA precursor solution by dissolving YBCO powder into the trifluoroacetic acid. A significant amount of the second phases, including $BaF_2$, was observed in the films fired at 700-7$25^{\circ}C$ for 2 h under $P(O_2)=10^{-3}$ atm and P($H_2O$)=4.2%, most probably due to an insufficient reaction time, and hence T$_{c}$ was greatly degraded. However the films fired at 750-80$0^{\circ}C$ for 2 h were composed of strongly c-axis oriented YBCO grams without any second phases. and exhibited the $T_c$ values of 89.5 ~ 91 K with a sharp transition. With increasing the firing temperature from 750 to 80$0^{\circ}C$ average grain size of YBCO was increased and grain connectivity was enhanced. The highest $J_c value of 1.1 MA/cm^2$ was obtained from the YBCO film fired at 80$0^{\circ}C$.>.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0