메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김동철 (충남대학교 공과대학 섬유공학과) 주창환 (충남대학교 공과대학 섬유공학과) 박세영 (Dept.of Textile Engineering ,Chungnam National University)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제32권 제11호
발행연도
1995.1
수록면
1,098 - 1,108 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The dence of processing parameters on the air-jet textured(AIT) yarn was investigated to characterize the structural properties of acetate and viscose rayon fibers. The air-jet texturing nozzle employed was Hemaiet manufactured by Heberlein Co., Swiss and the samples were produced with four diffirent air pressures(i. e.,), 4, 5, 6kg/m2), usage of impact ball and dry/wet conditions. The structural characteristics investigated were yarn instability and fiber configurations such as floats, arcs, potrudes, and cross/closed loops. The results obtained though this experiment was as follows: (1) the instabilities of acetate and viscose A/T yarns were increased with raising the air pressure of nozzle and usage of impact ball due to the increase of loop frequency, (2) the texturing effect of regenerated fibers was partially enhanced by the water application and the use of the impact ball due to the decrease of filament friction and the increase of turbulent air flow in the nozzle, and (3) the surface characteristics of acetate and viscose A/T yarns had the stable loop structure with increasing the air pressure of the nozzle and water application.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0