메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
조현혹 (부산대학교 공과대학 섬유공학과) 박지은 (부산대학교 공과대학 섬유공학과) 김홍성 (Dept. of Textile Engineering, Pusan National University)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제32권 제1호
발행연도
1995.1
수록면
74 - 80 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The critical concentrations for high tensile strength and modulus polyacrylonitrile(PAN) were measured on dimerhylformamide solution of PAN's which had various kinds of average molecular weights. These critical concentrations decreased with increasing molecular weight and were nearby placed at the same viscosity regardless of molecular weight. The PAN films were cast from the solution of critical concentrations. Two kinds of uniaxially drawn films were prepared; one was drawn in boiling water and the other was drawn in dry heat again artier drawn by 3 limes in boiling water. The structures of the drawn films were investigated by X-ray dinractometer, thermomechanical analysis, dynamic mechanical analysis, and tensile measurements. From this study, it has been found that the larger the molecular weigh of PAN increases, the higher the draw ratio is required to cause the crystallization upon drawing together with the increase in fibrillization of film surface. The degree of the overall crystallization and the molecular stress and internal defects in amorphous region increased with increasing molecular weight of PAN.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0