메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김동욱 (서울대학교 공과대학 섬유고분자공학과) 김익흠 (서울대학교 공과대학 섬유고분자공학과, 제일모직[주] 화성연구소, 서울대학교 공과대학 섬유고분자공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제31권 제4호
발행연도
1994.1
수록면
293 - 302 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Styrene-acrylonitrile copolymer(SAN) is a useful product with broad applications, but it has a critical drawback, brittleness. The laborious studies have been carried out to improve the impact strength of SAN, resulting in development of rubber toughened plastics which can be prepared by inclusion of rubber particles into SAM matrix. Acrylonitrile-butadiene- styrene terpolymers (ABS) are typical rubber toughened plastics but have low resistance to W light due to the double bond in butadiene rubber. In this study the butadiene rubber was replaced by acrylate rubber to prepare acrylonitrile-styrene- acrylate terpolymer (ASA). Butyl acrylate was used as a monomer and ethyl acrylate or 2-ethyl hexyl acrylate was incorporated as a comonomer to obtain the base rubbers, which would be grafted with SAW. The gel content of the base rubber was the highest when the crosslinking agent concentration was 5wt% to the monomer. The effects of the crosslinking agent concentration, the chain transfer agent concentration, and the monomer to polymer ratio on the graft ratio of ASA and the viscosity of free SAU were investigated in detail. The impact test showed that ASA had the highest toughness when the crosslinking agent concentration was 3wt% and the monomer to polymer ratio was 6/4. The impact strength of various resins which had different base rubbers was measured in the range of -40~$25^{\circ}C$.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0