메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
오애경 (부산대학교 공과대학 섬유공학과) 김한성 (부산대학교 공과대학 섬유공학과) 김승진 (Dept. of Textile Engineering, Pusan National University)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제30권 제6호
발행연도
1993.1
수록면
431 - 441 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The bending properties of the single yarns, such as the bending rigidity, the coercive couple, the hysteresis energy, and the residual curvature, are related with their constituent fibre diameters as well as the surface helix angle antral the linear density. The estimated and the experimental values of these properties are compared by varying the blend ratio of wool/polyester fibres. The validity of the specific bending rigidity was ascertained by adopting the value, which the experimental bending rigidity of the single yarn is divided by experimental yarn linear density. The bending rigidity of single blend yarns depends on the number of yam twist, the linear density and the blend ratio. The specific bending rigidity was decreased with increasing the number of yarn twist and blend ratio of polyester fibre. The coercive couple and the residual curvature, relating to intra-fibre friction in the yarn, were increased with blend ratio of polyester fibre. The coercive couple and the residual curvature of 100% polyester staple yarn were increased with the twist angle, and the maximum of these values were found to be increased as the blend ratios of wool/polyester fibres were increased.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0