메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박정민 (한양대학교 섬유공학과) 김병우 (한양대학교 섬유공학과) 정성훈 (한양대학교 섬유공학과) 송석규 (한양대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제35권 제9호
발행연도
1998.1
수록면
562 - 568 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
PC/ABS alloy filled with 11 ${\mu}{\textrm}{m}$ diameter stainless steel fibers was prepared with melt blending and compression molding. Volume resistivity, EMI shielding effectiveness, aspect ratio distribution, and configurations of SSF were investigated at various volume fractions and screw speeds on compounding. A dramatic change in volume resistivity was found at volume fraction of SSF in the range of 0.11% to 0.34% at which basic form of network was established in the matrix, while the percolation threshold of shielding effectiveness was observed in the range of 0.34% to 0.57%. The composites prepared at screw speed of 20 rpm showed lower volume resistivity and higher shielding effectiveness than those prepared at 30, 40 rpm. An additional increase of volume fraction exhibited an overlapping of SSF and decrease of average distance among SSF but the volume resistivity and shielding effectiveness of composites changed slightly after percolation threshold.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0