메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
허유 (경희대학교 공과대학 섬유공학과) 권원식 (경희대학교 공과대학 섬유공학과) 장승호 (경희대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제37권 제3호
발행연도
2000.1
수록면
171 - 179 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The control of silver thickness is regarded as one of the most important things in the staple yarn manufacturing process, because the regularity of silver has a crucial role I determining the physical properties of spun yarn as well as the yarn evenness. In this study, an effective method for using the autoleveller that is used widely in the textile industry was suggested to improve the yarn quality and productivity. For this purpose, the dynamic behavior of the silver due to the changes in delivery spee was experimentally modeled. On the basis of the model, the optimal controller parameters were obtained. Then the controller parameters were applied to a real drawing frame to verify the control efficiency. Results of this study are as follows: 1) A mathematical model describing the behaviors of slivers at various delivery speeds in drafting process was identified. 2) The integrating time of the PI controller should be lowered with increase in delivery speed. 3) By applying the optimal controller parameters to the actual system, the regularity of silver thickness was improved, but the effect of the autoleveller on the yarn regularity was reduced at higher delivery speeds.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0