메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
이신희 (부산대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제37권 제7호
발행연도
2000.1
수록면
374 - 381 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
A study has been made on the dry-jet wet spinning of chitosan fibers using 5% acetic acid as solvent and 5%, 10% aqueous sodium hydroxide as non-solvent. The technological characteristics of dry-jet wet spinning of chitosan fibers lie in the fact that small streams of dope extruded from the die are allowed to pass first through a short distance of air gap(0∼ 50 cm) before entering the spinning bath for full coagulation. This work showed the importances of air gap length and jet stretch ratio, and fiber tenacity up to 2.11% g/d could be obtained with elongation of 8∼13%. Deacetylation was readily achieved, and the extent of deacetylation was characterized by various techniques, including weight gain and elemental analysis. Individual fibers were evaluated on the basis of moisture content, swelling ratio, surface morphology, mechanical properties(tenacity, elongation, and work to rupture etc.), and fiber diameter. The fibers by this route were compared with those produced by wet spinning of chitosan.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0