메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박인동 (구미전문대학 섬유과) 장동호 (영남대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제33권 제1호
발행연도
1996.1
수록면
17 - 24 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The SBR film including a carbon black(Ketjen black, Denka black or Vulcan XC-72) was hot press laminated onto several fabrics. The carbon black incorporated SBR rubber(CB-SBR) film laminated fabrics were investigated in terms of resultant morphology, antistatic properties. The antistatic effect was observed from the loading level 2.5~5.0 wt% by lowering the specific resistivity below 10 $\Omega$.cm and loading the carbon black more than 10 wt% gave rise to conductivity by lowering the specific resistivity below 10 $\Omega$.cm. Above the relative humidity 50% the frictional electrostatic voltage generated by rubbing the CB-SBR laminated fabrics with cotton fabric remained nearly independent of the loading level of carbon black, whereas the frictional electrostatic voltage was notably diminished with increasing the loading level if the relative humidity is lower than 40%. Among the carbon blacks Ketjen black gave the highest antistatic efficiency, followed by Denka black and Vulcan SC-72. The increasing order of the frictional electrostatic voltage of the CB-SBR laminated fabrics with the same carbon black content was cotton, PET/cotton blend, wool, PET/wool blend, nylon, and PET. The critical content of carbon black in the CB-SBR laminated fabries producing a stable antistatic property(lower than 1kV) was dependent on the nature of the fabric 5~10 wt% for PET and nylon, 2.5~10 wt% for PET/wool blend, 2.5~5 wt% for wool, 1~5 wt% for PET/cotton blend, and 0.5~1 wt% for cotton.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0