지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2009.1
- 수록면
- 84 - 85 (2page)
이용수
초록· 키워드
오류제보하기
New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Preparation of Multi Core-Shell Particles by Emulsion polymerization
한국고분자학회 학술대회 연구논문 초록집
2004 .10
-
Core-Shell Poly(Styrene/Sulfonated N-hydroxy Ethyl Aniline) Latex Particles Prepared by Chemical Oxidative Polymerization in Emulsion Polymerization
Macromolecular Research
2006 .08
-
Epoxy Toughening Using Core-Shell Particles Obtained by Emulsion Polymerization
한국고분자학회 학술대회 연구논문 초록집
1997 .10
-
Stage emulsion polymerization . Ⅱ Shell polymer 의 제조 및 swelling
한국고분자학회 학술대회 연구논문 초록집
1991 .04
-
Preparation of the Core-Shell structured nanofibers with magnetic nano-particles in core-polymer for new applications
한국고분자학회 학술대회 연구논문 초록집
2009 .10
-
고반사 효율을 가지는 다층 복합 Core/Shell 입자의 제조 및 Shell 두께 제어 연구
한국에너지학회 학술발표회
2013 .05
-
Preparation of Core-Shell Nanoparticles by Emulsion Aggregation Process
한국고분자학회 학술대회 연구논문 초록집
2007 .04
-
Synthesis of PMMA/PEI core-shell particles via CO₂ assisted emulsion polymerization
한국고분자학회 학술대회 연구논문 초록집
2014 .10
-
Preparation and Characterization of Polymer/TiO₂ core-shell particles
한국고분자학회 학술대회 연구논문 초록집
2009 .10
-
Preparation of Latex Particle of Core-Shell Structure Using Semi - Batch" Emulsifier- free" Emulsion Polymerization
한국고분자학회 학술대회 연구논문 초록집
2002 .04
-
유화중합에 의한 Methyl methacrylate/styrene계 Core-shell 라텍스 입자 제조에 관한 연구
Elastomers and composites
2002 .01
-
Preparation of Al(OH)₃/PSt Core-shell Nanocomposites by Emulsion Polymerization
한국고분자학회 학술대회 연구논문 초록집
2006 .10
-
Preparation of core-shell composite phase change material using Pickering emulsion method
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
Dispersion polymerization of core-shell composite particles in polar solvents : solvency control of shell formation
한국고분자학회 학술대회 연구논문 초록집
1998 .04
-
Preparation of organic polymers for decontamination of surface radioactive contamination
한국방사성폐기물학회 학술대회
2010 .01
-
Verification of Core/Shell Structure of Poly(glycidyl methacrylate-co-divinyl benzene) Microspheres
Macromolecular Research
2009 .05
-
One-step Synthetic Route for Poly (Styrene/Thiophene) Core-shell Particles via Recycling Oxidative and Surfactant-free Emulsion Polymerization
한국고분자학회 학술대회 연구논문 초록집
2009 .10
-
Preparation and Characterization of Core-Shell Poly(Styrene/Tiophene) Latex Particles via Oxidative Polymerization in Emulsion Polymerization
한국고분자학회 학술대회 연구논문 초록집
2006 .10
-
Preparation and characterization of carbon black PEDOT core shell nanostructure using Emulsion polymerization
한국고분자학회 학술대회 연구논문 초록집
2010 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0