메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술대회자료
저자정보
이동욱 (한국원자력연구소 원자력재료기술개발, 성균관대학교 신소재공학과) 지봉기 (성균관대학교 신소재공학과) 임준형 (성균관대학교 신소재공학과) 주진호 (성균관대학교 신소재공학과) 정태원 (금오공과대학교 재료공학과) 박해웅 (한국기술교육대학교 신소재공학과) 정충환 (한국원자력연구소 원자력재료기술개발) 전병혁 (한국원자력연구소 원자력재료기술개발) 김찬중 (한국원자력연구소 원자력재료기술개발)
저널정보
한국초전도저온학회 한국초전도저온공학회 학술대회 한국초전도저온공학회 2003년도 학술대회 논문집
발행연도
2003.1
수록면
81 - 84 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The effect of annealing condition on the texture and microstructure development in Ni tapes fabricated by cold-rolling including powder metallurgy was investigated. The Pole-figure results showed that the Ni tapes annealed at lower temperature than 50$0^{\circ}C$ were the mixture of brass deformation texture and cube texture. The specimens annealed at high temperatures had only well-developed cube texture and the FWHMs of in-plane and out-of-plane were in the range of 8-10$^{\circ}$. The degree of texture was not significantly depended on annealing temperatures. The grain morphologies of Ni tapes prepared at low temperatures showed serrated grain boundaries due to incomplete recrystallization, but the specimens prepared at high temperatures showed stabilized grain shape without serrated grain boundaries.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0