지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.8
- 수록면
- 179 - 187 (9page)
이용수
초록· 키워드
오류제보하기
Existing composite forming processes such as the autoclave, prepreg compression forming (PCF), RTM, etc. require high production costs because of their long processing time. On the other hand, microwave heating process (MHP) can reduce the production costs since both mold and composite material can be heated directly. The aim of this study is to manufacture a mold consisting of polytetrafluoroethylene (PTFE), quartz glass, stainless steel clamps, and polyether ether ketone (PEEK) bolts for fabricating FML based on self-reinforced polypropylene (SRPP) using the MHP. First, the flame test was carried out prior to the MHP to check the temperature on the mold and whether the spark occurred at the mold and the edge of the FML. Second, the uniaxial tensile test was then conducted to obtain the mechanical properties of the FML manufactured by the MHP. The mechanical properties were compared with those of the FML fabricated by the PCF. As a result, the MHP using the PTFE mold can manufacture the FML more rapidly than the PCF, and obtain acceptable mechanical properties.
목차
Abstract
1. 서론
2. 몰드 제작 및 불꽃 실험
3. 단축 인장 실험
4. 실험 결과 및 고찰
5. 결론
REFERENCES
참고문헌 (17)
참고문헌 신청
H. S. Choi, H. S. Roh, G. H. Kang, and M. S. Ha, 2004, Study on the Thermo-Mechanical Behaviors of Fiber Metal Laminates using the Classical Lamination Theory, Trans. Kor. Soc. Mec. Eng. A, Vol. 28, No. 4, pp. 394-401. https://doi.org/10.3795/KSME-A.2004.28.4.394.
W. Gunnink, 1988, Damage Tolerance and Supportability Aspects of ARALL Laminates Aircraft Structures, Compos. Struct., Vol. 10, No. 1, pp. 83-104. https://doi.org/10.1016/0263-8223(88)90062-1.
L. B. Vohelesang and A. Vlot, 2000, Development of Fibre Metal Laminates for Advanced Aerospace Structures, J. Mater. Process. Technol., Vol. 103, No. 1, pp. 1-5. https://doi.org/10.1016/S0924-0136(00)00411-8.
B. E. Lee, J. Kim, B. S. Kang and W. J. Song, 2013, Numerical Study of the Formability of Fiber Metal Laminates Based on Self-reinforced Polypropylene, Trans. Mater. Process., Vol. 22, No. 3, pp.150-157. https://doi.org/10.5228/KSTP.2013.22.3.150.
E. T. Park, Y. H. Lee, J. Kim, B. S. Kang and W. J. Song, 2015, Evaluation of the Temperature Dependent Flow Stress Model for Thermoplastic Fiber Metal Laminates, Trans. Mater. Process., Vol. 24, No. 1, pp. 52-61. https://doi.org/10.5228/KSTP.2015.24.1.52.
W. Gunnink, 1988, Damage Tolerance and Supportability Aspects of ARALL Laminates Aircraft Structures, Compos. Struct., Vol. 10, No. 1, pp. 83-104. https://doi.org/10.1016/0263-8223(88)90062-1.
L. B. Vohelesang and A. Vlot, 2000, Development of Fibre Metal Laminates for Advanced Aerospace Structures, J. Mater. Process. Technol., Vol. 103, No. 1, pp. 1-5. https://doi.org/10.1016/S0924-0136(00)00411-8.
B. E. Lee, J. Kim, B. S. Kang and W. J. Song, 2013, Numerical Study of the Formability of Fiber Metal Laminates Based on Self-reinforced Polypropylene, Trans. Mater. Process., Vol. 22, No. 3, pp.150-157. https://doi.org/10.5228/KSTP.2013.22.3.150.
E. T. Park, Y. H. Lee, J. Kim, B. S. Kang and W. J. Song, 2015, Evaluation of the Temperature Dependent Flow Stress Model for Thermoplastic Fiber Metal Laminates, Trans. Mater. Process., Vol. 24, No. 1, pp. 52-61. https://doi.org/10.5228/KSTP.2015.24.1.52.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A Simple Method to Produce Fiber Metal Laminates with Enhanced Mechanical Properties Using an Ethylene Vinyl Acetate (EVA)-based Adhesive Film
폴리머
2019 .03
-
전자기력 발사장치를 이용한 Fiber Metal Laminate (FML) 고속 충돌 실험 및 유한요소 해석
항공우주시스템공학회 학술행사 논문집
2019 .05
-
Axial buckling response of fiber metal laminate circular cylindrical shells
Structural engineering and mechanics : An international journal
2016 .01
-
Deformation behaviour of steel/SRPP fibre metal laminate characterised by evolution of surface strains
Advances in aircraft and spacecraft science
2016 .01
-
Experimental Study of Fiber Metal Laminate (FML) Thin-Walled Tubes Under Quasi Static Loading
대한기계학회 춘추학술대회
2022 .11
-
Role of Reinforcement Materials on Mechanical and Tribological Properties of PTFE Composites
폴리머
2020 .07
-
A Study on Thermal and Flow Characteristics of an Injection Mold Using a Detachable Core Module with Embedded Heating
Journal of the Korean Society for Precision Engineering
2020 .05
-
이중 사출성형 제품의 인몰드 코팅 금형설계에 대한 연구
한국생산제조학회 학술발표대회 논문집
2015 .04
-
차체 부품 적용을 위한 섬유복합재-금속 적층판의 기계적 물성 특성 평가
한국자동차공학회 춘계학술대회
2021 .06
-
Study on Improvement of Catheter Tip Forming Process according to Plating Characteristics in Mold
Journal of the Korean Society for Precision Engineering
2022 .09
-
A Study on Conformal Heating of Curved Mold Using CNT Film Heater
Journal of the Korean Society for Precision Engineering
2022 .07
-
Energy Saving of Rubber Forming by Direct Heating Press Mold Development
Journal of the Korean Society for Precision Engineering
2022 .07
-
CAD 시스템에서의 설계 자동화기법을 활용한 금형 설계 효율화 방안 연구
한국기계기술학회지
2018 .01
-
타이밍 지터 환경에서 MHP 펄스를 이용한 M 진 초광대역 시스템의 성능분석
한국정보통신학회논문지
2015 .01
-
3D 스캔을 이용한 콘센트 커버의 역설계 및 금형 개발
한국금형공학회지
2015 .01
-
최근 한국 금형 산업 - Part 1. 한국금형산업현황
한국금형공학회지
2018 .01
-
전단코팅 공정으로 제조하는 금속-할라이드계 페로브스카이트의 박막성장에 미치는 공정변수의 영향 고찰
한국표면공학회지
2019 .02
-
미세먼지 제거용 PTFE 및 PTFE 멤브레인 필터의 차압 및 여과 특성
한국에너지기후변화학회 학술대회
2017 .11
-
다단냉간단조 비가공 타입에서 볼하우징 인서트 다이의 금형설계 검증
한국기계가공학회지
2021 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2020-551-001098819