메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제21권 제1호
발행연도
2020.1
수록면
42 - 49 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Organic solar cells (OSCs) without an over-coating layer, consisting of a silver nanowire (AgNW) transparent electrode, apoly(3,4-ethylenedioxythiphene):poly (styrenesulfonate) (PEDOT:PSS) layer, a poly(3-hexylthiophene-2,5-diyl):the [6,6]-phenylC61 butyric acid methyl ester (P3HT:PCBM) active layer, a LiF/Al electron collecting, and a top electrode, were successfullyfabricated in order to investigate the effect of surface roughness on the efficiency of OSCs. The AgNW transparent electrodeon acryl resin coated polyethylene terephthalate (PET) film was prepared through the filtration/transfer method. Sheetresistance of 30 Ω-1 and surface roughness of 10.5 nm were detected. After coating the PEDOT:PSS hole transfer layer andthe P3HT:PCBM active layer at 1000 rpm on the AgNW/PET transparent electrode, the surface roughness was reduceddramatically. However, open circuit voltage, short circuit current density, fill factor, and power conversion efficiency decreasedas the coating speed was raised during the formation of the PEDOT:PSS layer and the P3HT:PCBM active layer due to thedeterioration of the surface roughness. The surface roughness was determined to be crucial for the output performance ofOSCs.

목차

등록된 정보가 없습니다.

참고문헌 (18)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0