메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이의배 (대우건설) 고정원 (대우건설) 유재강 (대우건설) 김경태 (한라시멘트) 송동근 (아세아시멘트) 구경모 (아세아시멘트)
저널정보
대한건축학회 대한건축학회논문집 大韓建築學會論文集 第36卷 第7號(通卷 第381號)
발행연도
2020.7
수록면
163 - 171 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Recently, studies on concrete that can develop early age strength at low temperatures have been conducted for the purpose of shortening the construction period in cold weather. In other studies, high fineness ordinary Portland cement or type Ⅲ high early strength Portland cement were used as a binder to develop early age strength. In addition, to further enhance the development of early age strength, a liquid chemical admixture was used. However, in this study, powdered early strength admixture was used instead of liquid early strength admixture to further stabilize the quality of concrete, and it is possible to keep the ratio of cement and admixture unchanged by premixing. In this paper, early age strength properties of concrete using premixed binder of high fineness ordinary portland cement and powdered early strength admixture were evaluated. Also, finally, the conditions that could satisfy the target strength of 5 MPa to remove gang form were analyzed. As a result, it was possible to get the target strength of 5 MPa within 18 hours if the curing temperature was 13 ℃ or higher, and it was possible to get the target strength of 5 MPa within 15 hours if the curing temperature was 15 ℃ or higher. The maturity value to reach the target strength of 5 MPa was calculated 363 ℃·hr. and 340 ℃·hr., respectively, for unit cement weight of 340 kg/㎥ and 370 kg/㎥.

목차

Abstract
1. 서론
2. 실험계획 및 방법
3. 실험결과 및 고찰
4. 결론
REFERENCES

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-540-000910702