메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
민병선 (Seoul National Univ. of Science and Technology) 조호성 (Seoul National Univ. of Science and Technology) 남경원 (Seoul National Univ. of Science and Technology) 박창용 (Seoul National Univ. of Science and Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.29 No.3
발행연도
2020.6
수록면
243 - 250 (8page)
DOI
10.7735/ksmte.2020.29.3.243

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the forced convection electronics cooling systems in a desktop PC were replaced with a natural convection cooling system, and their cooling performance was compared experimentally. The natural convection cooling system consisted of a cooling block, cooling plate-fin assembly, and heat pipes. With this system, the operating temperature of the CPU (Central Processing Unit) was higher than that with the forced convection system owing to the lack of cooling capacity caused by the limited installation location and space. However, the properly designed natural convection cooling system for the GPU (Graphics Processing Unit) provided sufficient cooling capacity and the lower GPU operating temperature than that with forced convection under both idling and maximum calculation load conditions. The electric power consumption of the PC with the natural convection cooling system was at least 12.1% lower than that with forced convection.

목차

ABSTRACT
1. 서론
2. 실험장치 및 조건
3. 실험 결과
4. 요약 및 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-003-000660254