지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.14 No.3
- 발행연도
- 2020.5
- 수록면
- 461 - 471 (11page)
이용수
초록· 키워드
오류제보하기
Lamellar inorganic fillers have been used to improve the performance of polymer composites. In this paper, five kinds of lamellar inorganic fillers, including montmorillonite (MMT), mica, talc, glass flake (GF) and lamellar double hydroxide (LDH), were selected to modify epoxy emulsion cement mortar (EECM). The research evaluated the effects of the structure characteristics of lamellar fillers on the mechanical properties, water absorption and chloride ion permeability resistance of EECM, with comparison to granular ground calcium carbonate (GCC). Results indicated that lamellar fillers had no obvious superiority than GCC in the mechanical strength of EECM, even MMT caused the decline of the mechanical strength. However, lamellar fillers had improved the chloride ion permeability resistance of EECM compared with GCC, and they had the similar effect on reducing of water absorption except MMT. Although the low aspect ratio (AR) of the lamellar fillers benefited the increase of the strength and water resistance of EECM, the lamellar fillers with higher AR could improve the chloride ion permeability resistance of EECM more efficiently.
목차
Abstract
1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusion
5. Highlights
References
참고문헌 (49)
참고문헌 신청
Abdalkader, A. / 2017 / Corrosion behaviour of steel rebar in mortars subjected to magnesium sulfate and sodium chloride mixtures at 5 and 20 °C / Construction and Building Materials 153:358~363
Afzal, A. / 2016 / A review on polymer/cement composite with carbon nanofiller and inorganic filler / Polymer-Plastics Technology and Engineering 55(12):1299~1323
Aguayo, M. / 2014 / Electrically driven chloride ion transport in blended binder concretes : Insights from experiments and numerical simulations / Cement and Concrete Research 66:1~10
Alhozaimy, A. / 2016 / Significance of oxygen concentration on the quality of passive film formation for steel reinforced concrete structures during the initial curing of concrete / Cement & Concrete Composites 65:171~176
Alonge, O. R. / 2017 / Properties of hybrid cementitious composite with metakaolin, nanosilica and epoxy / Construction and Building Materials 155:740~750
Afzal, A. / 2016 / A review on polymer/cement composite with carbon nanofiller and inorganic filler / Polymer-Plastics Technology and Engineering 55(12):1299~1323
Aguayo, M. / 2014 / Electrically driven chloride ion transport in blended binder concretes : Insights from experiments and numerical simulations / Cement and Concrete Research 66:1~10
Alhozaimy, A. / 2016 / Significance of oxygen concentration on the quality of passive film formation for steel reinforced concrete structures during the initial curing of concrete / Cement & Concrete Composites 65:171~176
Alonge, O. R. / 2017 / Properties of hybrid cementitious composite with metakaolin, nanosilica and epoxy / Construction and Building Materials 155:740~750
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Highly Asymmetric Lamellar Morphologies
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
Effects of Liquid Metal Co-filler on the Properties of Epoxy/Binary Filler Composites
한국고분자학회 학술대회 연구논문 초록집
2023 .10
-
filler종류에 따른 PPS/filler compound
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Li₄Ti₅O12(LTO) 배터리 등가회로 모델링을 위한 내부 파라미터 체계적 해석
전력전자학회논문지
2018 .06
-
Study on Multi-Lamellar Emulsion (MLE) as an Active Ingredient Delivery System Using the Franz Diffusion Cell Method
한국고분자학회 학술대회 연구논문 초록집
2024 .09
-
Influence of ZrO2 nanoparticles on the wetting and microstructure of Al-Si-Cu filler for low temperature Al brazing
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .05
-
Thermal Decomposition of Massive Phase to Fine Lamellar α/β in Ti–6Al–4V Additively Manufactured Alloy by Directed Energy Deposition
Metals and Materials International
2019 .01
-
Highly Asymmetric Lamellar Nanopatterns based on Block Copolymer Self-Assembly
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
Precipitated Calcium Carbonate as a Filler Material for Polymer : A Review
에너지공학
2022 .06
-
Perpendicular Lamellar Orientation of Side-Chain Modified Fluorine-Containing Block Copolymers
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Engineering Lipid Membranes for Biomedical Applications
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
Formation Process and Structure of Lamellar Grain Boundaries in Titanium Rich TiAl Intermetallics
한국재료학회지
2016 .01
-
Dielectric Properties of Inorganic Filler/Polymer Blends Composites
한국고분자학회 학술대회 연구논문 초록집
2017 .10
-
Lamellar thickness of poly(ethylene oxide) film crystallized from gel state
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
Well-tuned digital memory characteristics in diblock copolymer devices depending on lamellar structure and orientation control
한국고분자학회 학술대회 연구논문 초록집
2016 .04
-
Effects of Inorganic Fillers on Mechanical Properties of Silicone Rubber
Elastomers and composites
2019 .01
-
Improvement of Charge Carrier Mobility of PEDOT:PSS Film Through Lamellar Stacked 2-dimensional Structure
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Disorder to Order: Bilayer-folded Lamellar Mesophase Induced by Random Polymer Sequence
한국고분자학회 학술대회 연구논문 초록집
2022 .10
-
층상구조를 가진 증발식 열교환기 습채널의 표면 젖음도 해석
설비공학논문집
2016 .07
-
Effect of MXene/rGO Hybrid Filler on Mechanical and Electromagnetic Interference (EMI) Shielding Properties of PA6 Nanocomposites
한국고분자학회 학술대회 연구논문 초록집
2021 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2020-532-000682125