메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김종겸 (Gangneung-Wonju National University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제34권 제5호
발행연도
2020.5
수록면
59 - 64 (6page)
DOI
10.5207/JIEIE.2020.34.5.059

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The voltage does not immediately become zero even if the running induction motor is stopped. In this state, if the motor is directly connected as an alternative power source, a large stress may be applied to the shaft by the high starting current. Therefore, when the main power supply is cut off, several methods have been proposed to reduce the stress on the motor when switching to the alternative power supply. The most common method specified in international standards is to switch the power supply when the residual voltage of the motor reaches a certain value. There are two methods to obtain the magnitude of the residual voltage when the motor is stopped, using an equivalent circuit diagram or using parameters suggested by the manufacturer.
In this study, the two methods were compared and analyzed, the parameters required at the time of power supply switching were calculated, the method of searching for a reasonably stable residual voltage value, and the allowable range of the cycle required at the time of alternative power supply switching were presented.

목차

Abstract
1. 서론
2. 유도전동기의 개방시 잔류전압
3. 시뮬레이션 및 비교 분석
4. 결론
References

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-565-000605896