메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
모영준 (Seoul National University of Science & Technology) 이기성 (Seoul National University of Science & Technology) 박태성 (Seoul National University of Science and Technology) 박익근 (Seoul National University of Science & Technology) 김용성 (Seoul National University of Science & Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.29 No.2
발행연도
2020.4
수록면
134 - 140 (7page)
DOI
10.7735/ksmte.2020.29.2.134

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
We prepared ITO thin films using a recycled target with composition ratio of In₂O₃ : SnO₃ (90 : 10 wt%). ITO thin films deposited on a glass plate at room temperature were examined for surfaces and micro structures at different heat-treatment temperatures. The mechanical properties of the transparent electrodes were also evaluated using an ultrasonic microscope and nanoindenter. When the annealing temperature was above 200℃, the ITO thin films showed stable transparent-electrode characteristics with resistivity of 1.55 × 10<SUP>-4</SUP> Ωcm and high transmittance of > 85% at 550 nm through the processes of recovery and recrystallization. Results of nondestructive characterization using the ultrasonic microscope for the ITO thin-film surfaces and internal defects showed that the effects of changes to the internal defect density in the films were more dominant than those to the film surfaces. In addition, the film durability was evaluated by measuring the plasticity index using a nanoindenter.

목차

ABSTRACT
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (19)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-003-000512608