메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김동성 (충남대학교) 최광식 (충남대학교) 성용주 (충남대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제51권 제6호(통권 제191호)
발행연도
2019.12
수록면
76 - 83 (8page)
DOI
10.7584/JKTAPPI.2019.12.51.6.76

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (10)

초록· 키워드

오류제보하기
The bulk of pulp mold would be one of the very important properties as environmental friendly packaging material or water-absorption material. Since the pulp mold is made of various plant fibers, such as wood and non-woody fibers including recycled fiber, the structure of pulp mold becomes more dense during drying process by hydrogen bonding originated from the polarity of water. In this study, the effects of the application of the low polarity solvent such as ethyl alcohol as the forming solution and the spraying solvent after a vacuum drainage process were evaluated. The solution of the different mixing ratio between water and low polarity solvent was applied for this experiment. The results showed that the higher contents of the low polarity solvent in the forming solution resulted in the bulkier structure, the faster drying speed and the higher water absorption properties. The spraying treatment with the mixing solution with the low polarity solvent led to the similar effects on the pulp mold structure, which showed that the bulkier structure could be achieved by changing the polarity of water in the wet pulp mold with the lower polarity solvent.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-586-000227813