메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김희원 (충북대학교) 오윤택 (충북대학교) 박종수 (충북대학교) 김형진 (국민대학교) 박종문 (충북대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제51권 제6호(통권 제191호)
발행연도
2019.12
수록면
22 - 29 (8page)
DOI
10.7584/JKTAPPI.2019.12.51.6.22

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Formation and the surface roughness of paper are important factors to determine the quality of the paper. Formation is determined by an extent of the fiber distribution non-uniformity. which decides three-dimensional structure of paper. If paper has poorly formation, there is a wide change in local basis weight, thickness and physical and chemical properties due to the non-uniformity of fiber distribution and bonding. Formation also affects strength, opacity and printability of paper. The surface roughness of the paper indicates the degree of height deviation in thickness direction. The stylus can be used to measure the profile of the paper surface height directly. The surface roughness SMD (mean absolute deviation from the height average, MAD) and the fractal dimension value (FD value) could be obtained by analyzing the thickness profile of paper. The formation was poor as the softwood pulp ratio increased and the beating time increased. Floc frequency of 1-16 mm size of 100% Sw-BKP handsheet was higher than that of 100% Hw-BKP handsheet. SMD obtained from the height of the paper thickness had a high correlation with the formation. However, FD value of analyzing the profile of thickness height had a low correlation with the formation.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-586-000227888