메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장세초 (한양대학교) 이현규 (한양대학교) 조건환 (두산중공업) 김동화 (국방과학연구소) 조진수 (한양대학교)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제22권 제6호(통권 제117호)
발행연도
2019.12
수록면
45 - 55 (11page)
DOI
10.5293/kfma.2019.22.6.045

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The optimization process was used to optimize the receiver hole to improve the discharge coefficient and temperature drop effectiveness of gas turbine pre-swirl system by using CFD analysis. In the optimization process, three design variables were selected through the geometry and sensitivity analysis, two objective functions were important performance evaluation indicators of secondary cooling air system. The Optimal Space-Filling Design method was used to get the experimental points and Kriging method to create the response surface, candidate points were created by Multi-Objective Genetic Algorithm method through the response surface. The optimization process was finished when the deviation between predicted result and CFD result was less than 0.1 %. Comparison with initial model, optimized model improved the secondary cooling performance and reduced the flow losses of the system. According to the final results from optimization process, the discharge coefficient and temperature drop effectiveness of the optimized model were increased 1.778 % and 5.335 % than initial model, respectively.

목차

ABSTRACT
1. 서론
2. 본론
3. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-554-000096307