메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
조선대학교 공학기술연구원 공학기술논문지 공학기술논문지 제12권 제1호
발행연도
2019.1
수록면
1 - 6 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Nano-sized yttria-stabilized tetragonal zirconia powder was synthesized by the hydrolysis reaction of mixed solution with zirconium oxychloride and yttrium nitrate. After the calcination and milling of precipitated zirconium hydroxide, powder characteristics, forming-ability and sintered properties were characterized as raw materials for a dental implant. Synthetic nano-sized zirconia particles had a primary particle size of 25〜30 nm and monolithic tetragonal phase. Primary agglomerates were only found in the powder with the size of 191 nm, but, not secondary agglomerate. Dense compacts were fabricated by the sintering at 1500 °C for 2 hours after the pressing using a synthetic powder without granulation. Low sintered densities of 5.7〜5.9 g/cm3 (relative density; 93.5〜96.5%) were found at heat-treatment of 1450〜1500 °C for 2 hours. Through the granulation by spray drying, highly performant zirconia powder was obtained. Spherical granules with the size of 44 μm were formed by spray drying at 200 °C. Green compact after pressing showed homogeneous microstructure on fracture surface , and it induced highly sintered zirconia specimens with an apparent density of 6.04 g/cm3 (relative density; 99.0%) and a grain size of 250〜300 nm at 1500 °C for 2 hours.

목차

등록된 정보가 없습니다.

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0