메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Dokyum Kim (Kyungpook National University) Hyunil Jo (Kyungpook National University) Young-Woo Heo (Kyungpook National University) Jeong-Joo Kim (Kyungpook National University) Joon-Hyung Lee (Kyungpook National University)
저널정보
한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.27 No.6
발행연도
2018.11
수록면
178 - 183 (6page)
DOI
10.5757/ASCT.2018.27.6.178

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An amorphous In-Sn-Zn-O (ITZO) thin film has high electrical properties and is less prone to cracking in repeated bending, which is advantageous for application to flexible display panels. When ITZO sputtering target is sintered at high temperatures, the original compositions often deviate from the stoichiometry due to volatilization of In, Sn and Zn. In order to minimize the evaporation, targets have been sintered in high oxygen atmospheres. We investigate the volatile-induced compositional deviation of the ITZO samples after sintering. An electron probe micro-analyzer (EPMA) depth profile of the composition and thermogravimetric weight loss at high temperature were analyzed. The results showed that the sintering of ITZO at high oxygen partial pressure is very effective to suppress the volatilization of In, Sn, and Zn. The electrical and optical characteristics of the ITZO thin films are also analyzed.

목차

Abstract
Ⅰ. Introduction
Ⅱ. Experimental details
Ⅲ. Results and discussion
Ⅳ. Conclusions
References

참고문헌 (19)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-420-001277162