메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김강환 (울산대학교) 신지철 (울산대학교)
저널정보
한국전산유체공학회 한국전산유체공학회지 한국전산유체공학회지 제24권 제3호
발행연도
2019.9
수록면
19 - 24 (6page)
DOI
10.6112/kscfe.2019.24.3.019

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Design parameters for wind tunnel facility aimed for low pressure aerodynamic testings was investigated by two dimensional numerical simulation using a Fluent software. The number of corner vanes before the contraction part showed the most noticeable changes in the flow uniformity at the test section. With 20 corner vanes, span-wise symmetry became worse as the length ratio of the contraction part decreased, while the velocity distribution exhibited the best uniformity when the length ratio was 40%. As the diverging angle of the divergent part after the fan decreased from 3 degree to 2 degree, the flow uniformity was degraded. It turned out that a density change due to the altitude change does not affect the boundary layer profile.

목차

1. 서론
2. 풍동 설계 변수의 결정
3. 전산 해석
4. 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-559-001250703