지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.9
- 수록면
- 55 - 60 (6page)
이용수
초록· 키워드
오류제보하기
Polymer:nonfullerene solar cells with an inverted-type device structure were fabricated by employing the bulk heterojunction (BHJ) active layers, which are composed of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)-benzo[1,2-b:4,5-b’]dithiophene))- alt-(5,5-(1’,3’-di-2-thienyl-5’,7-bis(2-ethylhexyl)benzo[1’,2’-c:4’,5’-c’]dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(6-methyl-2-methylene- (3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2’,3-d’]-s-indaceno[1,2-b:5,6-b’]dithiophene (IT-M). The BHJ layers were formed on a pre-patterned indium-tin oxide (ITO)-coated glass substrate by spin-coating using the blend solutions of PBDB-T and IT-M. The solar cell performances were investigated with respect to the cell position on the ITO-glass substrates. In addition, the short-term shelf lifetime of solar cells was tested by storing the PBDB-T:IT-M solar cells in a glovebox filled with inert gas. The results showed that the performance of solar cells was relatively higher for the cells close to the center of substrates, which was maintained even after storage for 24 h. In particular, the PCE of PBDB-T:IT-M solar cells was marginally decreased after storage for 24 h owing to the slightly reduced fill factor, even though the open circuit voltage was unchanged after 24 h.
목차
ABSTRACT
1. Introduction
2. Experimental Section
3. Results and Discussion
4. Conclusions
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Long-Term Shelf Lifetime of Polymer:Nonfullerene Solar Cells Stored under Dark and Indoor Light Environment
Current Photovoltaic Research
2020 .12
-
Flower like Buffer Layer to Improve Efficiency of Submicron-Thick CuIn1-xGaxSe2 Solar Cells
[ETRI] ETRI Journal
2015 .12
-
Difference in Voltage Loss between Polymer Solar Cells and Perovskite Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Cu(InGa)Se2 박막 태양전지 흡수층 제조 공정 연구
한국에너지학회 학술발표회
2017 .04
-
The Role of Photovoltaics for the Realization of the Carbon Neutral Society
AFORE
2022 .09
-
3-5족 적층형과 CuInGa(S,Se)<sub>2</sub> 및 Cu<sub>2</sub>ZnSn(S,Se)<sub>4</sub> 화합물반도체 박막태양전지
공업화학
2015 .01
-
대면적 태양전지의 분할 수에 따른 모듈 특성 모델링
전기전자재료학회논문지
2023 .03
-
Towards High Efficiency Thin Film Solar Cells
한국정밀공학회 학술발표대회 논문집
2017 .05
-
Status of SnS solar cells
한국에너지학회 학술발표회
2022 .04
-
고효율 Solar Cell 기술개발동향
전자공학회지
2015 .01
-
Temperature-Insensitive Aggregation Behavior of Polymer Donor Enables Processing Condition-Tolerant, Additive-Free High-Performance All-Polymer Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
Performance analysis of polymer solar cells with different polymerization methods
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
New Non-fullerene Acceptor with Extended Conjugation of Cyclopenta[2,1-b:3,4-b’] dithiophene for Organic Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2022 .10
-
Efficient polymer solar cell and perovskite solar cell modules fabricated by 3D printer-modified slot-die coating system
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
Silar Based ZnxCd1-xS Buffer Layers: A Solution for Meeting High Voc in SnS Thin Film Solar Cells
AFORE
2019 .11
-
Incorporation of Interfacial Passivation Layer for Performance and Stability Enhancement in (FAPbI₃)1-x:(MAPbBr₃)x Perovskite Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2018 .10
-
Effect of Anti-solvent Treatments in One-step Low Temperature Processing of Planar (FAPbI₃)1-x(MAPbBr₃)x based Perovskite Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
Development of culture strategies for stem cell maintenance and differentiation through regulation of cell behaviors
한국생물공학회 학술대회
2016 .04
-
Evaluation Results of Solar Module and Solar Cell during Damp-Heat Test
AFORE
2024 .11
-
Al<sub>2</sub>O<sub>3</sub>/Si/Al<sub>2</sub>O<sub>3</sub>구조를 이용한 실리콘태양전지 제작 및 특성
반도체디스플레이기술학회지
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0