디스크 형상의 BNT (BaNd2Ti4O12) - LCP (Liquid Crystal Polymer) 세라믹 폴리머 복합체를 압축성형법으로 제조하여, xBNT - (1-x)LCP (x = 0, 10, 20, 30, 40 vol.%) 복합체의 유전특성 및 기계적 특성의 변화를 조사하였다. BNT의 부피분율(vol.%)이 10에서 40으로 증가함에 따라 복합체의 유전상수는 증가하였으나, 유전손실 및 복합체의 굴곡강도는 저하됨을 보였다. 복합체의 유전상수는 modified Lichtenecker's model로 잘 설명이 되었으며, 이때 1차 ball milled BNT 복합체의 경우에는 k=0.392, 2차 ball milled BNT 복합체의 경우에는 k=0.303 값을 가졌으며, 이것은 BNT 필러가 복합체 내에서 잘 분산되어 있음을 의미한다. 2차 ball milled BNT (D50 = 1.39 um) 로 구성된 복합체는 1차 ball milled BNT (D50 = 2.45 um)의 복합체에 비하여 유전상수가 크며, 이러한 유전상수의 차이는 LCP 기지상 내에서 BNT 필러의 분산 상태 및 입자크기의 차이와 관련 있다고 사료된다. 또한, 2차 ball milled BNT 복합체는 1차 ball milled BNT 복합체에 비하여 굴곡강도가 우수함을 나타내었다.
We investigated the dielectric and mechanical properties of ceramic polymer composite xBNT -(1-x)LCP (x= 0, 10, 20, 30, 40 vol.%). The disk shaped BNT (BaNd₂Ti₄O_12) - LCP (liquid crystal polymer)composite samples were prepared by compression molding method. With increasing the BNT content in composites from 10 to 40 vol.%, the dielectric constant increased but the dielectric loss as well as bending strength of composites reduced. These composites were well described with modified Lichtenecker's model having k = 0.392and 0.303 for the first and second ball milled BNT filled composites, which means that the BNT filler in composites are well dispersed. The dielectric constant of the composite comprised of the second milled BNT (D_50= 1.39 um) was higher that of the composite of the first milled BNT (D_50= 2.45 um), which seems to be related with the different particle size and dispersion of BNT fillers in LCP matrix. The bending strength of the composite containing the second milled BNT was superior to that of the composite of the first milled BNT.