메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
We fabricated the YBCO films on LAO substrate using the TFA-MOD method and evaluated the effects of heat treatment temperature and film thickness on the microstructure, degree of texture, and critical properties. The calcining and firing were performed at the temperature range of 370 ℃-460 ℃ and 750 ℃-800 ℃, respectively. For the films fired at 775 ℃ after calcining at 400 ℃-430 ℃ showed highest critical temperature (TC-onset) of 89.5 K and critical current (IC) of 40 A/cm-width which corresponds to critical current density (JC) of 1.8 MA/cm2. The highest critical properties are probably attributed to the formation of purer YBCO phase, stronger biaxial texture, and higher oxygen content, according to the XRD, pole-figure, SEM, Raman analysis. From the multi-coated films, the IC increased from 39 to 169 A/cm-width as the coating repeated to four times, while the corresponding JC was measured from once to be in the range of 0.8-1.2 MA/cm2. Both IC and JC degraded as the coating repeated further, indicating that the optimum thickness is in the range of 1.0 ㎛1.7 ㎛.

목차

등록된 정보가 없습니다.

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0