지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국전기전자재료학회 Transactions on Electrical and Electronic Materials Transactions on Electrical and Electronic Materials 제13권 제2호
- 발행연도
- 2012.1
- 수록면
- 60 - 63 (4page)
이용수
초록· 키워드
오류제보하기
Enhancement of efficiency and luminance of organic light-emitting diodes was investigated by the introduction of a lithium carbonate (Li2CO3) electron-injection layer. Electron-injection layer is used in organic light-emitting diodes to inject electrons efficiently between a cathode and an organic layer. A device structure of ITO/TPD (40 nm)/Alq3 (60 nm)/Li2CO3 (x nm)/Al (100 nm) was manufactured by thermal evaporation, where the thickness of Li2CO3layer was varied from 0 to 3.3 nm. Current density-luminance-voltage characteristics of the device were measured and analyzed. When the thickness of Li2CO3 layer is 0.7 nm, the current efficiency and luminance of the device at 8.0V are improved by a factor of about 18 and 3,000 compared to the ones without the Li2CO3 layer, respectively. The enhancement of efficiency and luminance of the device with an insertion of Li2CO3 electron-injection layer is thought to be due to the lowering of an electron barrier height at the interface region between the cathode and the emissive layer. This is judged from an analysis of current density-voltage characteristics with a Fowler-Nordheim tunneling conduction mechanism model. In a study of lifetime of the device that depends on the thickness of Li2CO3 layer, the optimum thickness of Li2CO3 layer was obtained to be 1.1 nm. It is thought that an improvement in the lifetime is due to the prevention of moisture and oxygen by Li2CO3 layer. Thus, from the efficiency and lifetime of the device, we have obtained the optimum thickness of Li2CO3 layer to be about 1.0 nm.
목차
등록된 정보가 없습니다.
참고문헌 (9)
참고문헌 신청
이 논문의 저자 정보
최근 본 자료
댓글(0)
0