메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국부식방식학회 Corrosion Science and Technology Corrosion Science and Technology 제11권 제1호
발행연도
2012.1
수록면
1 - 8 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The development of martensitic grades which can be processed in continuous galvanizing lines requires the reduction of the oxides formed on the steel during the hot dip process. This reduction mechanism was investigated in detail by means of High Resolution Transmission Electron Microscopy (HR-TEM) of cross-sectional samples. Annealing of a martensitic steel in a 10% H2 + N2 atmosphere with the dew point of -35 ℃ resulted in the formation of a thin c-xMnO.SiO2 (x>1) oxide film and amorphous a-xMnO.SiO2oxide particles on the surface. During the hot dip galvanizing in Zn-0.13%Al, the thin c-xMnO.SiO2 (x>1)oxide film was reduced by the Al. The a-xMnO.SiO2 (x<0.9) and a-SiO2 oxides however remained embedded in the Zn coating close to the steel/coating interface. No Fe2Al5-xZnx inhibition layer formation was observed. During hot dip galvanizing in Zn-0.20%Al, the c-xMnO.SiO2 (x>1) oxide film was also reduced and the amorphous a-xMnO.SiO2 and a-SiO2 particles were embedded in the Fe2Al5-xZnx inhibition layer formed at the steel/coating interface during hot dipping. The results clearly show that Al in the liquid Zn bath can reduce the crystalline c-xMn.SiO2 (x>1) oxides but not the amorphous a-xMnO.SiO2 (x<0.9) and a-SiO2oxides. These oxides remain embedded in the Zn layer or in the inhibition layer, making it possible to apply a Zn or Zn-alloy coating on martensitic steel by hot dipping. The hot dipping process was also found to deteriorate the mechanical properties, independently of the Zn bath composition.

목차

등록된 정보가 없습니다.

참고문헌 (15)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0