메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국기계기술학회 한국기계기술학회지 한국기계기술학회지 제16권 제3호
발행연도
2014.1
수록면
1,515 - 1,521 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The dissertation is on the measurement of the strain caused by the characteristics and thetemperature changes of the TIG welded zone which is used with 3D ESPI system that is functionallymodified through the laser ESPI system. Experimental results have derived from the fact that the weldedzone has micro crack during the various phased of the process such as rolling, alkali cleaning, aircooling and heat processing due to the repetitious up-and-down of the temperature. Especially, both 60℃and 90℃ are selected to measure the strain on the welded zone which can be effected by these twotemperatures in the manufacturing process. The flat plate differences between ESPI and the strain gage are within 2 %, and they are theexactly same with the results from the temperature changes of 60 ℃ and 90 ℃, and also within 3 %and 4 %. As the tensile load increase, the strain of aluminum material increases linearly. Also the sameeffect are observed as the temperature goes up with irregular-line type. The comparison of the strain byESPI and the strain gage in the welded specimen is within the 2.6% when it is under the roomtemperature and low-load conditions, while it is measured within 3 % under the high load condition.

목차

등록된 정보가 없습니다.

참고문헌 (6)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0