메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국기계기술학회 한국기계기술학회지 한국기계기술학회지 제17권 제5호
발행연도
2015.1
수록면
1,037 - 1,043 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study was carried out to develope the local heating system using hot water pad. Results of the study were as follows. When the outside temperature of greenhouse was reached at the lowest of 0.8°C, the surface temperature of heated water pad, the temperature inside tunnel, inside temperature of greenhouses were getting colder sequentially. The average temperature of local heating zone for experimental plot is 25.4°C, and control plot for entire space heating keep the average inside temperature at 25.6°C and internal greenhouse temperature were maintained constantly at the setup temperature in both a test and a control plot. The survey for temperature of inlet and outlet for hot water pad at above case showed that the average inlet temperature of hot pad was 50.2°C and outlet temperature for that is 47.8 °C and the temperature difference between them was 2.4°C. When the Circulation flow rate is 112 L/h and the temperature change is 1°C, the amount of heat exchange was increased by 112 kcal and the flow rate was changed to 360 L/h, the amount of heat exchange was reached at 360 kcal. The analysis of heating costs showed that local heating systme using hot water pad cost 2,976 won /day and the entire space heatingsystem cost 32,987 won/day. Comparing with the entire space heating system, local heating system using hot water pad could save the 91 % of heating costs customarily required.

목차

등록된 정보가 없습니다.

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0