메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국지식정보기술학회 한국지식정보기술학회 논문지 한국지식정보기술학회 논문지 제12권 제4호
발행연도
2017.1
수록면
571 - 580 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The design of a slot-coupled directional coupler and a slot-coupled crossover for use in a switched beamforming network operating over wideband has been presented and discussed. In order to achieve wideband characteristics, the coupler and the crossover use slot-coupled microstrip transmission line (MTL) technology. Since the slot-coupled components have a structure in which the two signal lines on the top and bottom side are coupled to each other through the rectangular slot on the common ground plane, the amount of the combined signal is determined by the width of the slot, the width of the line and the height of the substrate. The width of the slot should be set to be wider than the width of signal line to induce proper coupling, and the width of the slot should be about 1.5 times to the width of the signal line. It can be seen that the coupling coefficient increases as the ratio of the width of the line to the height of the substrate increases, which means that the amount of the signal coupled to the output port increases as the width of the line increases. The proposed coupler and the crossover have been obtained high performance of 3±0.5dB coupling, 90±1° phase difference, and 0.5dB coupling and 45±3.5° phase shift in the operating frequency band, respectively. In addition, they have been implemented on the double-layered MTL in a small size and without intersecting lines on microstrip substrate.

목차

등록된 정보가 없습니다.

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0